SUSPENSION AND SUPPORT ELEMENTS
L – Z – V SUSPENSİON ELEMENTS
- Suspension elements are used in suspension and hanger systems with rod and bolt.
- Vibration mount reduces vibration which created by pressure and speed in air ducts.
Product code |
Product definiton |
Material |
H |
W |
S |
Unit weight. |
package |
Package weight |
mm |
mm |
mm |
Kg/ad |
Ad/bağ |
Kg |
|||
İV.LAE.4725 |
L Askı Elemanı |
GS |
92 |
47 |
2,5 |
0,06 |
200 |
12 |
İV.ZAE.5025 |
Z Askı Elemanı |
GS |
58,5 |
50 |
2,5 |
0,08 |
200 |
15 |
İV.VAE.4220 |
V Askı Elemanı |
GS |
106 |
42 |
2 |
0,12 |
200 |
24 |
CAST İRON CLAMPS
- Pipes and sprinlşer systems are used to hang on and secure the profiles to building constractions.
- Available with M8 ve M10 screws.
- Provide the opportunity fixing beams without welding or drilling.
- It has a quick height adjust ability.
HARDWARE GROUP
- Rods are used in suspension systems as connection and control elements. They are produced in M6-M30 between 1 or meter at lenght
- S type pull anchors are used to assembly middle or high weighted loads to concrete. Allows installation with normal bolts or studs.
- Pegs are used short drilling depth and on hard concrete surfaces.
- Sleeve pegs are used for assemblying low and middle weighted loads to concrete.
- U Bolts are used in assembling the pipes to channels . They are not suitable as fixing elements but suitable to use in floating points. They have sizes between ½ "grade 20"
- Nuts are used in areas where bolts, screw and rots are used in order to make adjustments and stabilizations.
- Bolts are used in suspension systems fixing with nuts and are used in corner connections of flanges and clamps as connection and fixing element.
- Stamps are used in areas where bolts and studs are used by obtaining a smooth printing surface in order to achieve a healty stabilization
- Extension nuts are used in assembly of gear elements such as rods and bolts.
- Drilling screws are used in stabilization of flanges to the air ducts.